Start a Project
How to Choose a Contractor in Western North Carolina
← Back to Blog

How to Choose a Contractor in Western North Carolina

hiring a contractorgeneral contractorAsheville NCWestern North Carolinahome remodelingcustom homes

Most of the jobs that go sideways in western North Carolina don't go sideways because of bad luck. They go sideways because of a decision the homeowner made before any work started, usually with too little information and a low number sitting on the table. After 30 years in the trade and roughly 100 projects across Buncombe, Henderson and Haywood counties, we've found that choosing a builder for kitchen, bath or whole-home remodeling or a new house comes down to a handful of checks anyone can run.

Start with the license, and look it up yourself

North Carolina requires a general contractor's license for projects valued at $40,000 or more, labor and materials together. The NC Licensing Board for General Contractors issues those licenses and has a public search on its website. Run the name yourself rather than taking a number off a truck door or a business card.

When you look it up, check three things: that the license is active, that the name matches the company on your contract, and that the license tier fits your job. Limited, intermediate and unlimited licenses carry different project-size caps, so a license can be perfectly valid and still not cover a large custom home.

Electrical, plumbing and HVAC work fall under their own state licensing boards. A good general contractor will tell you who's handling those trades and that they're licensed. If your project falls under the threshold, it's still fair to ask.

Ask for insurance certificates from the agent

Ask for current certificates of general liability and workers' compensation, sent directly from the insurance agent rather than handed to you as a photocopy. Steep lots, tight access and high roofs are normal around Asheville and in the surrounding counties, and if someone gets hurt on your property, you want it to be clear whose policy responds.

Find someone who knows these mountains

A contractor can be excellent in a flat suburb and still be out of their depth on a 30 percent grade. Western NC work has its own set of problems: retaining walls, drainage, driveway access for concrete trucks, soil that changes across a single lot, and wells and septic systems outside town water and sewer. Older housing stock adds more. In the homes around Asheville you can open a wall and find knob-and-tube wiring, undersized framing or a past repair nobody documented. Homes built before 1978 may also contain lead paint, and renovators who disturb it have to follow lead-safe work rules.

So ask specific questions. What have you built on a slope like this? How would you handle water on this site? What do you expect to find when you open up this house? A contractor who knows the work will have an answer ready, and will probably ask you some questions back.

On a remodel, ask how they handle the surprises behind the walls and how those changes get priced. On a new build, custom home building experience on similar terrain matters more than a nice portfolio on easy lots.

Know who pulls the permit

Your contractor should pull the permits, in their own name. The permit office depends on the address: the City of Asheville inside city limits, Buncombe County outside them, and otherwise the county or town that covers the property, such as Henderson or Haywood County. Steep-slope rules, setbacks and septic approvals can vary from one to the next.

Be cautious if a contractor suggests you pull the permit as the owner or skip it to save time. That can leave you holding the responsibility for the work, and unpermitted work tends to resurface when you sell or file an insurance claim.

Compare bids line by line, not bottom line

Three bids are a reasonable target, but they only tell you something if they cover the same scope. The low number often isn't cheaper. It's just missing something. Look for:

  • Allowances for cabinets, tile, fixtures and flooring, and whether they're realistic for what you want
  • Site work and demolition, spelled out rather than assumed
  • What's excluded, listed in writing
  • How long the bid is good for, since material prices and labor availability move

Skilled labor is tight in this region, and storm recovery since Hurricane Helene has pulled on the same crews and subcontractors. A contractor who can't tell you who is actually doing the work, or a price well below the others, deserves a closer look. Ask what's different, and listen to how they answer.

Get it all in writing

A solid contract names the scope, the price, the allowances, a rough schedule, how change orders are approved and priced, and the warranty. Payments should follow completed milestones, not the calendar. Be wary of a large payment up front before anything has happened on site.

Ask about lien waivers too. In North Carolina, subcontractors and suppliers who go unpaid can have lien rights against your property, even when you've paid your general contractor. Getting lien waivers with each payment is a common way to protect yourself. For a large project, it's worth having an attorney read the contract before you sign.

Call the references and ask better questions

Ask for two or three recent clients, plus one from a few years back, because that's when you find out how a house has held up. Ask whether the budget and schedule moved and why, how problems got handled, and whether they'd hire the same contractor again. If you can, go see the finished work.

Then pay attention to how the first few conversations feel. You're going to be working with this person for months, often while they're inside your home. Clear answers and returned phone calls before you sign are a fair preview of what comes after.

If you're weighing a project and want a straight read on scope and budget, reach out for an estimate. We're glad to walk the site and talk it through.

Ready to start your project?

Get in Touch